The main working principle of laser pipe cutting machine

The thermal energy generated by the laser beam emitted by the laser is controlled by an intelligent system and combined with a mechanical motion system to realize the processing and cutting of pipes, thereby greatly improving production efficiency.

The main categories of laser pipe cutting machines are: fully automatic, semi-automatic, three-chuck, manual laser pipe cutting machines, and so on. Moreover, these laser cutting machines can cut square, round, and special-shaped tubes of various materials, and can realize a variety of process processing of various pipes, including cutting, beveling, perforation, and 45-degree cutting. Among them, the fully automatic laser pipe cutting machine can be professionally cut and automatically loaded and unloaded. It has two styles, which are divided into strapping automatic feeding pipe cutting machine and arranged automatic feeding pipe cutting machine, which can easily cut pipes without manual intervention, convenient and fast.

Laser pipe cutting machine has the following advantages:

High cutting accuracy: positioning accuracy is 0.05 mm.

Smooth cutting surface: The cutting surface is flat and smooth without burrs, and the roughness of the cut surface is generally within 12.5.

The slit is uniform and narrow: after the laser beam is focused through a special part, a small spot is formed at a specific position, and the focus can reach a high temperature and power at a specific position, so that the material is extremely fast at the focus position. It is heated to the degree of vaporization, and pores and gaps are formed through vaporization and evaporation. Through the control of the intelligent system, the mechanically moving material and the light beam will have a relative linear movement, so that the holes are continuously gasified to form narrow slits.

Fast cutting speed: The cutting speed can reach 10 meters per minute, and the maximum positioning speed can reach 70 meters per minute, which is twice as fast as wire cutting.

Good cutting quality: The laser pipe cutting machine adopts non-contact cutting, and the cutting edge is less affected by heat, so basically no thermal deformation of the workpiece occurs, and the cutting seam generally does not require secondary processing.

Not affected by the type of material to be cut and the hardness of the material: the laser can process various types of materials, etc., no matter what kind of hardness, it can be cut without deformation.

Not affected by the shape of the workpiece: The processing flexibility of the laser is very good, and it can process any graphics, cut any pipes and other special-shaped materials through special software.