1. MACHINE INTRODUCTION
1.1 Scope of application:
E model laser pipe cutting machine LT-6025EA is mainly used for cutting, modeling and blanking of metal pipes. It is suitable for square pipes, round pipes, rectangular pipes, elliptical pipes, flat elliptical pipes and channel steel with diameters of 16-250mm. , H steel, angle iron, triangular pipe, etc. and other special-shaped pipes and other various metal pipes of any shape.
1.2 Advantages
1. Machine Bed
• Stable and anti-vibration, good rigidity and high precision.
• The bed is specially designed to prevent it from being burnt down by high-power laser.
• Independent research and development of the bed and overall design. The imported
machining center is processed as a whole to ensure that the guide rail surface and rack surface are processed and formed at one time to ensure accuracy.
• Long service life.
1.3 Chuck
Acme Laser independently designs, develops and produces the chuck. It is for small tubes in the industry. The special chuck for laser pipe cutting machines has high efficiency and good stability. With the full servo bus control system, the efficiency is about twice that of ordinary pipe cutting machines.
1.4 Scrap Collection
• A scrap truck is set up at the bottom of the bed to collect scrap from the production process and small parts at any time.
• The equipment is equipped with a front-receiving platform, which can be customized to the customer's needs 3-6 meters of feed-assisted platform.
1. Rails
• Taiwan linear guide, high precision and wear resistance
• Selected special metal materials, high wear rigidity
• Smooth scrolling with a small coefficient of friction minimizes wear and tear
2. Transmission
• Taiwan flanks, 2M oblique teeth, grinding level 6 ensure high-precision motion under a variety of complex conditions.
• The use of state-of-the-art grinding teething process, mass production accuracy is high.
1.5 System
• Acme Laser cloud system, processing can be automatically sought, real-time acquisition of Z-axis information, high-precision processing.
• Highly accurate identifying of processing tubes, simplifying the cutting process and improving processing efficiency.
• Support for three-chuck model, you can do zero-tail processing, saving raw material costs.
• The system can simulate 3D cutting on the computer, effectively restoring the real laser cutting process, improving processing efficiency.
3. PROCESSING CAPACITY (2000W FIBER LASER)
Material | Thickness(mm) | Speed(m/min) | Gas |
SS | 1 | 23 | Air |
2 | 8 | Air | |
3 | 4 | Air | |
4 | 2 | Air | |
5 | 0.8 | Air | |
CS | 1 | 17 | Air |
2 | 8.5 | Air | |
3 | 3 | Air | |
4 | 1.8 | Air | |
5 | 1.5 | O2 | |
6 | 1.2 | O2 | |
8 | 1 | O2 | |
10 | 0.7 | O2 | |
Alu. | 1 | 8.8 | Air |
2 | 5 | Air | |
3 | 3.5 | Air | |
Co. | 1 | 14.5 | Air |
2 | 4.9 | Air | |
3 | 1.7 | Air | |
4 | 0.8 | Air |
4. MAIN CONFIGURATION
No. | Name | QTY | Brand |
1 | Laser Source | 1 | Chinese/Imported(1000W-6000W) |
2 | Laser Head | 1 | Raytools |
3 | Cutting System | 1 | TubePro |
4 | Front Chuck | 1 | Full Stroke Chuck(250mm) |
5 | Back Chuck | 1 | Acme Laser Pneumatic Chuck |
6 | Machine Bed | 1 | Acme Laser |
7 | Electrical Parts | 1 | Schneider/Chint |
8 | Pneumatic Parts | 1 | Airtac |
9 | Rail and Ball Screw | 1 | Taiwan HIWIN/ Equivalent configuration |
10 | Helical Rack | 1 | Taiwan YYC/ Equivalent configuration |
11 | Other parts for Machine bed | 1 | adaptation |
12 | Servo Motor and Driver | 1 | Panasonic(Bus) |
13 | Reducer | 1 | Shimpo/Motoreducer/ Equivalent configuration |
14 | Front-receiving platform | 1 | Acme Laser(Option) |
15 | Pipe Support | 1 | Servo Floating Support |
16 | Oxygen Adjusting Proportional Valve | 1 | SMC |
17 | Water Chiller | 1 | Standard |
18 | Nesting Software | 1 | TubesT Professional Nesting Software(Option) |
19 | Control System | 1 | FSCUT5000 |
20 | Loading | 1 | Acme Laser |
Customers can choose from the following configurations
No. | Name | Optional (tick is standard) |
1 | Pipe Support | Servo Floating Support √Nylon Wheel |
2 | Cutting System | FSCUT5000 √FSCUT3000S |
3 | Loading | With √Without |
4 | Nesting | With √Without |
5 | Air Compressor and Dryer | Option |
6 | Cutting Length | 口 6m √口 8m口 9m口 12m |
7 | Front-receiving Platform | With √Without |
8 | Chuck Diameter | 口 120mm口 170mm口 250mm √口 350mm |
5. TECHNICAL PARAMETER
Technical Parameter | ||||
Model | LT-6025EA | Size | 11750×4550×2250mm(L×W×H) | |
Cutting Length | 6500mm | Diameter | Φ 口 16-250mm | |
Total Power | 20KW | Laser Power | 1000W 1500W 2000W 3000W 4000W 6000W | |
Tail | ≥65mm | G.W. | 6 Ton | |
Y Travel | 7350mm | Power Supply | 380v50Hz±10% | |
X Travel | 400mm | G Speed | 1.2G | |
Z Travel | 250mm | Front chuck load | 290kg | |
X,Y Positioning Accuracy | ±0.05mm/1000mm | Feed rate | 92m/min | |
X,Y Repeat Positioning Accuracy | ±0.03/1000mm | Control System | FSCUT5000 | |
Max Rotation Speed | 85r/min | Gas | O2、N2、Air | |
Fiber Laser Source | ||||
Work Mode | Continuous | Laser Power | 1000W-6000W | |
Auxiliary System | ||||
Cooling System | Constant temperature control chiller for laser machine (external connection) | |||
Circuit and protection system | According to CE standard | |||
Software | ||||
Software | TubesT Professional Nesting(Option) | |||
Support file format | Solidworks、Pro/e、UG etc. |
6. FEATURES OF EACH COMPONENT
E Model LT-6025EA shown in the figure below
6.1 Laser Source
E model high effective laser tube cutting machine LT-6025EA adopts domestic well-known brand Maxphonics fiber laser.
The laser is a new generation of semiconductor-pumped single-mode continuous ytterbium fiber laser system in the near-infrared spectral range (1060~1080nm). It has the characteristics of high power, ideal beam quality, fiber transmission and high electro-optical conversion efficiency.
This type of laser system has unparalleled high reliability of other solid-state lasers and gas lasers. Its advantages are: a wide range of wavelength selection, extremely low signal-to-noise ratio, extremely high stability and long service life.
Main features: There is no lens in the laser generator, maintenance-free, and the light guide system is composed of optical fibers;
• No start-up wait time required;
• The beam quality is good and the power density is high.
• The efficiency of electro-optical conversion is up to 35%;
• Beam mass TEM00 (M2<1.1);
• More than 100,000 hours of pumping source life;
• Maintenance-free operation, single- mode fiber transmission;
Main Technical Parameters of Laser Source
Name | Parameter | Name | Parameter |
Laser Type | Fiber Laser | Beam Quality | 2 mm*mrad |
Work Mode | Continuous | Laser transmission instability | ≤ 5% |
Wave Length | 1070-1080 nm | Indicator Light Wave Length | 635/658nm(Red) |
Rated Output Power | 2000 W | Indicator Light Parameter | 1mW |
6.2 Laser Head
With Raytools fiber laser cutting head, equipped with capacitive non-contact high automatic tracking system, the cutting head can automatically adjust the height with the deformation of the work piece, without affecting the cutting of the work piece. The response speed and processing efficiency of the Z-axis direction are greatly improved.
Characteristics:
• Includes linear drives, cutting systems, adjusters and lying units
• Integrated contactless capacitor sensors
• Compact appearance for easy space cutting
• Water-cooled optics and fiber optic sockets
• All water-conducting components are made of stainless steel
• Integrated collimation units
Main Technical Parameters of Laser Head
Name | Parameter | Name | Parameter |
Focal Length | 125 mm | Auxiliary gas input | O2, N2,Air |
Cutting Head | Equipped with capacitive height adjustment system | Auxiliary gas output | Dual air source air circuit, numerical control selects proportional output |
6.3 Machine Bed
E model High effective laser pipe cutting machine LT-6025EA is composed of bed, chuck, transmission system, electrical system, lubrication system, optical system, cooling system, loading and unloading system and other components.
The beds used by the company's products are all independently developed and processed as a whole. The bed, which is designed with the principle of structural dynamic design and the variable analysis technology of the finite element method, has excellent dynamic and static characteristics. The frame structure welded by high- quality steel plates and steel pipes has undergone independent welding, secondary aging treatment, and precision machining by a large gantry milling machine.
The company has cooperated to introduce high-precision CNC machining centers such as HAAS from the United States, Mazak from Japan, and Yingyuan from Taiwan. The precision milling of the bed uses a large Italian gantry milling machine, and the independent research and development design and high- precision production and processing of core components have been realized. Ensure that the guide rail surface and rack surface are processed and formed at one time to ensure accuracy. These design and processing methods ensure the machine tool has excellent shock resistance, high rigidity and stability.
6.4 Self-developed Intelligent Full-stroke Chuck
Acme laser chuck R & D team insists on independent innovation, strong R & D capabilities, obtained a number of technical patents, completely independent intellectual property rights. There are many high-precision CNC machining centers worth more than 20 million yuan, such as Haas from the United States, Mazak from Japan, Taiwan and Switzerland. Aiming at the
120mm | 170mm |
250mm | 350mm |
pain points of the current laser pipe cutting machine chuck, with great concentration, we have designed and developed a special smart chuck for the Acme laser pipe cutting machine, which is more suitable for the application of pipe cutting machines than other manufacturers.
Performance advantage
• Square hole design, stronger passing ability;
• The clamping force can be adjusted intelligently, suitable for different types of pipe processing requirements;
• The clamping range of full stroke, without manual adjustment;
• With an eight-cylinder structure, the clamping force is twice that of ordinary chucks;
• Precision grinding gear drive, stronger power and higher efficiency;
• The highest level of dustproof, stronger stability
• The lengthened design of the rear chuck allows the front chuck to achieve "zero tailing" cutting with two chucks.
• It can effectively clamp various shapes of profiles, such as: square tube, round tube,
rectangular tube, oval tube, flat oval tube, channel steel, H steel, angle iron, triangle tube, etc.
Chuck Manufacturing Workshop
6.5 Pipe Support
Adjustable Diameter Wheel
The equipment is equipped with a lifting support mechanism with multiple rotatable and adjustable diameter wheels. The lifting mechanism can realize pneumatic control and automatic lifting. When the processed pipe changes, Automatically rotate the adjustable diameter wheel support can be adjusted to make the support wheel the same diameter as the processed pipe.
Servo Floating Support
The servo floating support can adjust the height in real time according to the height of the pipe when it rotates to achieve perfect support during the cutting process.
6.6 System: Acme Cloud System
Acme Laser cloud system is based on real-time data collection of laser cutting equipment, and through industrial big data analysis, it realizes processing intelligence and assists users in improving management. Acme Laser cloud system provides users with real-time monitoring, equipment digital management, processing report analysis and display, historical processing data analysis, processing efficiency comparison, abnormal working condition detection, health assessment reminder, power sheet consumption analysis, preventive maintenance reminder management and other functions . The Acme Laser cloud system helps users to dynamically grasp the health status of equipment, remotely monitor operating status and fault information, thereby improving equipment maintenance efficiency, reducing equipment unexpected downtime, and extending equipment life cycle. Ding point cloud system provides historical processing analysis and efficiency analysis functions, and helps users improve work efficiency through data analysis.
• Diaplay of key equipment information such as total start-up time,total cutting leangth,start-up rate and effective cutting rate, daily work history change trend, laser, etc.
• Real-time monitoring of the real-time processing progress of the current task
• Processing daily report to check the daily processing situation
• Efficiency analysis pays attention to the dynamics of machine tool efficiency
• Task statistics keep abreast of changes in the number of machine tool tasks
• Electricity cost analysis and basic cost information such as sheet usage
• Running statistics Check the running status of the machine tool at any time, data monitoring, processing statistics, travel statistics
• Maintenance management provides maintenance reminders based on machine tool working condition information
• Health management of core components such as lasers and cutting heads, and health monitoring of core components
• The rich knowledge of knowledge centers such as cutting software, nesting software, knowledge center, short video cutting and nesting software, etc. can be seen at a glance.
6.7 Nesting TubesT
TubePro tube cutting software is a professional cutting software for processing all kinds of tubes. Seamlessly docking with the layout software TubesT, TubesT realizes the processing of the layout, co-edge, basic process and special process of parts. After exporting the processing file, you can directly use TubePro to cut. The three-dimensional cutting function can effectively simulate the real laser cutting process and greatly improve the processing efficiency. Abundant cutting functions, realizing precision cutting of various special-shaped and complex graphics that are difficult to achieve by conventional processing, such as pipe drilling, cutting, intersecting line cutting.
Three-dimensional simulation (the nesting software model is exactly the same as the actual one):
Simulation Real Cutting
6.8 Front-receiving Platform(Option)
The cut workpiece can be automatically transferred to the workpiece area, and the waste box is placed under the cutting area. Automatic material collection. Real-time support. Prevent pipe shaking. Ensure accuracy and cutting effect. Unique design can realize automatic separation of waste and finished products. The finished products fall into the finished product box and the waste falls into the waste box. Receiving diagram (optional)
6.9 Semi-Automatic Loading(Option)
(1). Automatic Loading and Unloading - 15s automatic loading patent design.
ACME patent loading mode: a loading hole is set between the rear chuck and the base, and the pipe can be pushed into the bed directly through the material rack with rollers, cutting and loading are performed at the same time, which can save about 15s of loading time. Maximize efficiency. After the first pipe is cut, the back chuck returns to the position, the loading mechanism automatically rises, and the second pipe is finished loading. Save labor costs and improve efficiency.
(2). Feeder-the most stable one.
Acme Laser independently designs and produces independently, can be suitable for various tube types such as round tube, square tube, rectangular tube, H steel, channel steel, L steel, etc.
• The total load of the whole machine is 2Ton. It can support 300kg/pipe;
• Servo feeding, the feeding position is accurate, and the bed close cooperation;
• Chain drive, stable structure, suitable for batch Processing;
• 50mm diameter drive shaft, good rigidity;
• One person can operate multiple devices, saving manpower, improve efficiency.
7. SPARE PARTS, SPECIAL TOOLS AND CONSUMABLES
7.1 Random accessories
No. | Name | QTY |
1 | Nozzle | 5 |
2 | Protection Lens | 5 |
3 | Ceramic Holder | 2 |
7.2 Consumables
No. | Name |
1 | Nozzle |
2 | Focus Lens |
3 | Collimation Lens |
4 | Protection Lens |
5 | Ceramic Holder |
7.3 List of documents with machine
Quality Certificate | Packing List | Electrical schematic diagram | Machine Manual |
1 | 1 | 2 | 1 |
Consummable List | Laser Source Manual | Water Chiller Manual | Nesting Software |
1 | 1 | 1 | Option |
8. OPERATING COST ANALYSIS
Name | Option 1: Air compressor cutting | Option 2: Oxygen cutting | Option 3: Nitrogen cutting | |
Power consumption (peak power consumption) | Laser Source | 5KW | 5KW | 5KW |
Chiller | 6.3KW | 6.3KW | 6.3KW | |
Air Compressor | 11KW | |||
Machine | 3KW | 3KW | 3KW | |
Dust Extraction | 1.5KW | 1.5KW | 1.5KW | |
Consumables | 0.5CNY/H | 0.5 CNY /H | 0.5 CNY /H | |
Gas | 0 | 15 CNY /H | 60 CNY /H | |
Total Power | 26.8KW | 15.8KW | 15.8KW | |
(Power factor 0.8) | ||||
Total power consumption | 16.1KW/H | 9.5KW/H | 9.5KW/H | |
(if 60% cutting efficiency) | ||||
Total operating cost | 16.6 CNY | 25 CNY | 70 CNY | |
(if 1CNY/Kwh) |
Material cutting thickness analysis (the actual cutting speed is affected by the pipe diameter)
Metal | Thickness (mm) | 1000W | 1500W | 2000W | 3000W | 4000W | 6000W |
Speed | Speed | Speed | Speed | Speed | Speed | ||
(m/min) | (m/min) | (m/min) | (m/min) | (m/min) | (m/min) | ||
1 | 15.0-22.0 | 18.0-25.0 | 25.0-33.0 | 28.0-38.0 | 30.0-44.0 | 35.0-48.0 | |
2 | 5.00-6.60 | 7.00-10.0 | 7.00-10.00 | 5.50-7.00 | 5.50-7.70 | 6.00-8.25 | |
3 | 2.50-3.85 | 4.00-5.50 | 4.00-5.60 | 3.60-5.00 | 3.70-5.50 | 4.00-5.50 | |
4 | 2.00-3.30 | 2.50-3.50 | 2.80-4.00 | 3.00-4.50 | 3.50-4.62 | 3.50-5.50 | |
5 | 1.40-2.00 | 2.00-2.80 | 2.00-2.75 | 2.50-3.30 | 2.50-4.00 | 2.60-3.52 | |
6 | 1.20-1.65 | 2.00-2.42 | 2.00-2.42 | 2.30-2.86 | 2.50-3.52 | 2.00-2.80 | |
8 | 0.90-1.32 | 1.20-1.65 | 1.20-1.65 | 1.80-2.20 | 2.00-2.80 | 1.80-2.30 | |
10 | 0.60-0.90 | 1.00-1.32 | 1.00-1.32 | 1.20-1.65 | 1.20-2.20 | 1.60-2.10 | |
CS | 12 | 0.40-0.70 | 0.70-1.00 | 0.70-1.00 | 1.00-1.32 | 1.00-1.76 | 0.70-1.00 |
16 | 0.60-0.80 | 0.60-0.80 | 0.60-0.90 | 0.70-1.00 | 0.65-0.95 | ||
20 | 0.50-0.80 | 0.60-0.90 | 0.60-0.77 | ||||
22 | 0.66-0.90 | 0.40-0.65 | |||||
25 | |||||||
30 |
SS | 1 2 3 4 5 6 8 10 12 16 20 22 25 30 35 40 45 | 16.5-22.0 4.50-6.10 2.00-3.10 1.00-1.65 0.40-0.70 0.20-0.45 | 20.0-26.0 18.0-22.0 4.50-5.50 2.00-2.50 1.50-2.00 0.70-3.10 0.20-0.45 | 27.5-33.0 18.0-22.0 4.50-5.50 2.20-2.80 1.50-2.00 0.70-3.10 0.35-0.60 | 31.0-38.5 10.0-16.5 7.00-10.0 5.00-7.20 1.80-2.45 1.00-1.65 1.20-2.00 0.70-1.00 | 33.0-45.0 10.0-20.0 7.50-12.0 5.50-9.00 4.00-5.50 2.60-4.50 1.60-2.80 0.70-1.65 0.50-0.90 | 50.0-65.0 30.0-40.0 18.0-25.0 10.0-15.5 8.00-13.5 6.00-9.00 4.00-5.50 1.80-2.80 1.20-1.65 0.80-1.20 0.60-0.90 |
9. COOPERATION BRAND
10. INSTALLATION AND COMMISSIONING
On-site power distribution cabinet: 380V, 50HZ, three-phase four-wire, and the capacity is not less than 60 KVA.
1. The equipment should be installed with dedicated grounding, and its grounding resistance should not exceed 4Ω.
2. Provide necessary lifting equipment and personnel, lifting and handling equipment: cranes with a minimum lifting height of not less than 3 meters and a minimum lifting weight of 10 tons, or those meeting the above conditions and a minimum lifting weight of more than 10 tons Crane or forklift, and 2 jacks.
3. Provide materials such as steel plates for on-site debugging of equipment. Before the equipment arrives at the site, the buyer needs to prepare various materials for equipment debugging.
4. Provide temporary pass for debugging personnel.
5. The buyer needs to prepare before the equipment arrives at the site: cutting gas: high-purity nitrogen (purity ≥99.999%), oxygen ≥99.99%, clean air without water and oil.
6. Equipment space and foundation requirements: the ground bearing strength is at least 2000kg/m2, and the ground flatness is less than 5mm;
7. On a solid and firm foundation, pour a 350mm thick cement layer. The cement number is not less than 425#, and a shock-absorbing groove is set around the equipment foundation.
8. Compressed air pipeline: The compressed air pipeline connected to the machine tool is required to be made of stainless steel and withstand the maximum pressure of 15bar (the length of this pipeline is determined according to the installation of the field equipment)
10.1 Factory inspection standards
NO | Name | Content | Note | ||
1 | Time | After the machine is installed and debugged | / | ||
2 | Location | In Acme Laser Factory | / | ||
3 | Acceptance content | Machine appearance, operation and function demonstration | Meet product specification and technical agreement requirements | Including spare parts and tools | |
Machine accuracy check | Geometric accuracy | Refer to the acceptance report provided by the seller | The seller randomly provides an acceptance report with inspection content and corresponding acceptanceinspection standards | ||
Motion accuracy | Participate in the acceptance report provided by the seller | ||||
Transmission function verification | Test machine's program USB interface transmission function | / | |||
Verify delivery content | Verification according to contract supply content | / |
10.2 Buyer inspection standards.
The drawings provided by the buyer can be used as the buyer's acceptance standard after being signed and confirmed by the seller, and the drawings are attached to this agreement. If there is no appendix drawing provided, it shall be implemented according to the factory inspection standard.
11、 INSTALLATION
11.1 Installation
15 days before the equipment is shipped, provide the customer with the installation layout plan (including the civil works and the water, electricity, gas consumption and piping, interface requirements of the equipment installation).
The equipment is installed in the user's factory, and the user is required to provide enough space, power supply and ventilation system to install the equipment. The installation is installed by our trained engineers. We are responsible for equipment installation and commissioning. The customer is
responsible for the civil work of the equipment installation and the water, air pipe, and power cord are connected to the machine tool designated by our engineer. The pipeline connected to the machine tool is our responsibility, but the user should provide the necessary cooperation and assistance for the equipment installation and commissioning of our engineer .
11.2 Training
ACME supplies door to door services all over the world. Charging standards and service processes are as below:
The training time is 3-5 days and is completed in the user's factory. Mainly learn equipment maintenance, operation, laser protection, processing technology, graphic editing, common troubleshooting, etc. The trainees are required to be mechanical, electrical or optical assistant engineers or engineers, understand computer operations, and know SolidWorks drawing. Trainees should pass the assessments on equipment operation, basic laser knowledge, safety protection and maintenance organized by the supplier before they can take up their posts.
(A). Charging standards:
Technician visa fees, domestic travel expenses (including transportation cost occurred during handling documents);
Training and maintenance fees: $150/day/person (take the time of landing and starting off of plane in customer’s country as standard);
International round-trip tickets (reserved and paid by the buyer, and supply the e-ticket information to our company );
Abroad accommodation(arranged and paid by the buyer) (B).Overseas training/maintenance processes:
ACME company will calculate the fees of item 1 and item 2 above, and then inform the buyer. After the buyer pays the fees, ACME company will arrange for the technician to apply for a visa.
We will inform the buyer after the technician gets the visa. The buyer should supply the round-trip ticket information mentioned above in item 3, and arrange accommodation from item 4 after the technician arrives.
Only after getting the approval of ACME company, the buyer can apply for an extension for the training and maintenance. The buyers should pay for the” extend training and maintenance service fees” before the start of the extend service.
12. WARRANTY AND SERVICE
12.1 General principles
I 、We are responsible for the maintenance of facilities which are within the Warranty conditions.
II 、Users must keep the machine's integrity and independence during operation. In the following situation, our company will not take any direct, indirect or joint liability. Furthermore, if any
equipment is damaged or there are any losses in either economic or reputation to our company due to the following situation, we, ACME company, reserve the right to investigate any legal liability.
1) Using the equipment in an environment that it was not designed for..
2) Altering the machines privately, including, adding parts, reducing parts, dismounting, using another brand's parts, etc.
3) Human damage or doing operations and maintenance without following the requirements in the instructions.
4) Damage caused by movement or transportation.
On condition of not influencing the machine's performance, our company reserves the right to change the product's specifications and name the products before informing the customer.
Our company is responsible for the quality and performance of the machine we sell. However, we are not responsible for other indirect obligations and responsibilities.
12.2 Detailed Principles
Equipment Warranty: 2 years. Calculated from the production date in machine’s nameplate. Specific details are as below:
I Laser module Warranty:
Fiber Laser Source warranty:2 years Fiber Laser Cable: no warranty
(P.S. Laser module’s warranty date calculated from the production date in laser module tag)
II The warranty does not include consumable parts, such as glass mirrors, belts, switches, gas nozzles ,foots/wheels, keys/press boards, etc.
III Warranty of peripheral devices (if the machine has them):
Warranty of peripheral devices is decided by supplier, calculated from the production date in the device’s tag. Maintained by device’s manufacturers as standard, Our company assist maintenance. Peripheral devices including water-chillers, fans ,air compressor etc.(If the machine has them).
Accessories repair and shipping cost
Within the warranty period
For free repair or replacement of accessories, the buyer should bear the shipping costs from their local place to our company if it needs to tested, repaired or replaced.
If the failure cause by the parts’quality after testing(non human factors and use environment etc.), it will be repaired or replaced free of charge, and ACME company will bear the return shipping cost. If the failure doesn’t cause by the parts’quality, the buyer should pay the repair fees and round-trip shipping cost.
P.S. The repaired parts should be returned to our factory. if the buyer is in arrears of spare parts,
ACME company will cancel the warranty terms of the machine).